Help & Contact local_shipping Fast shipping stars Best price Guarantee cached 100 day returns, free size exchange sendit Largest Online Shop for MX & MTB
chevron_leftIn MX Workshop

Motocross & Enduro brake pad change - we show you how it's done!

For a safe start of your season, you should definitely check the condition of your brakes. In addition to changing the brake fluid, regular replacement of brake pads is one of the most important tasks before you can hit the track. With our instructions, you can carry out your own brake pad change and you're on the safe side.

Have fun!

Some advice before we start

  1. The process shown can be applied to various brake systems. Nevertheless, we recommend to always check the bike-specific features. The manual will help you in any case.
  2. Always change brake pads in pairs or per wheel! Even if your brake pads are only worn on one side, you should always renew both brake pads.
  3. Pay attention to cleanliness and use the correct cleanser. Cleaning the brake caliper or brake disc with oil-based, non-volatile cleaning spray is life-threatening. Always use a special brake cleaner and use it sparingly.

Got it? Great! Then let´s get started!

1. Brake pad change on the front wheel

Working steps:

  1. Remove the protective cap of the brake retaining bolts and loosen them.
  2. Dismount the caliper and push the brake pistons back into the caliper as far as possible.
    Tip: Use the old brake pads to push back to protect the brake pistons.
  3. Remove the retaining bolts. Now you can pull out the old brake pads.
  4. Thoroughly clean the caliper and the brake retaining bolts and check the technical condition. Now you can insert the new brake pads and fix them.
  5. Mount the caliper with the correct torque on the fork.
    Tip: Secure the screws with a medium-strength screw glue.
  6. Important: Pull your brake lever several times until you feel a clear pressure point and check if your wheel turns freely.

2. Brake pad change on the rear wheel

Working steps:

  1. Press the brake piston into the caliper.
  2. Disassemble the retaining bolt and pull out the old brake pads to the rear.
  3. Check the technical condition of the caliper. If everything is alright, you can insert the new brake pads and fix them.
  4. Check the pressure point on the foot brake lever again and check that the wheel turns freely. Done!

3. Function check / brake test

If your brake doesn't work as desired, first check the condition of your brake discs and thoroughly clean them with brake cleaner. If necessary, you also have to bleed your brake. Here we show you how this is done.

If your brakes continue to cause problems, be sure to consult a professional mechanic before you ride again!

More about brakes

Brake pads MX Brake discs MX Brake discs guards Accessories Brake lines

If you liked this tutorial, feel free to leave a like and subscribe to our YouTube channel, where we regularly upload videos with English subtitles. This way, you will receive valuable tips from the MX & MTB world on a regular basis.

Visit us on Youtube