SRAM
MTB Brake Guide RE
Details:
- Use: E-MTB
- System: open system
- Technologies: Pure Bladder, PiggyBack, TPC Plus, Bleeding Edge, Heat Shield
- Lever material: Aluminium
- Case/caliper material: Aluminium
- Caliper design: 4-piston, dual diameter S4 caliper
- Fluid: DOT 5.1
- Pad: Steel-backed, sintered metal
- Features, Tool-free Reach Adjust, MatchMaker X compatible, Grip Shift compatible
- Weight approx.: 415 g
Note: Brake disc and adapter are not included in the scope of delivery.
Bleeding Edge:
Bleeding Edge technology makes bleeding brakes quick and simple. An updated fluid path and bleed porting make it easier to push fluid through the caliper. A dedicated bleed adapter plugs into the bleed port and seals the system to minimize air contamination and fluid loss.
Pure Bladder:
SRAM's brake lever design includes a reshaped bladder that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it's needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.
Heat Shield
The stainless steel heat shields breaks the thermal connection between the pad and caliper body, reducing caliper fluid temperature by about 20C even in the most extreme testing conditions.
PiggyBack:
The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement - so you can switch your levers on the handlebar and run them moto without hassle.
TPC Plus:
A hydraulic brake's timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM's timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.