Simple / even lighter / maximum grip!
These are the attributes that probably fit best to the Titan pedal of the Black One series. The Black One Titan is again 60 g lighter than the conventional Black One pedal and brings as a pair only 249 g on the scale. This fully CNC machined gem builds extremely flat to ensure maximum ground clearance when moving through rough terrain.
The plain bearing of the German manufacturer IGUS is used. This significantly increases the life of the Black One pedal, as there is almost no more wear in the area of the bearing. From the factory, the pedal turns a little sluggish, but this is intended. This prevents the pedal independently continues to rotate, should you ever take your foot off the pedal during a tight cornering maneuver!

Safety note: If not otherwise specified by the crank manufacturer. Make sure that the pedal is tightened with min. 37 to max. 42 Nm.

Details:

• Pedal size: 100 x 100 mm
• Pedal height: 15 mm
• Pedal thread: 9/16
• Bearing: 1 x IGUS plain bearing / 2 x industrial bearing
• Pin setup: 20 aluminum pins per pedal (US Size 6/32")
• Pin height: 5 mm above the pedal
• Weight: 249 g in pair (+/- 5 % weight tolerance)
• Material: Aluminum - Super Light Weight (pedal) / Titanium (axle)