Simple / light / maximum grip
These are the attributes that probably best fit the pedal of the Black One series. From the outset, this pedal is designed to maximize durability and shape with the lightest possible weight. This fully CNC machined gem builds extremely flat to ensure maximum ground clearance when moving through rough terrain.
The plain bearing of the German manufacturer IGUS is used. This significantly increases the life of the Black One pedal, as there is almost no more wear in the area of the bearing. From the factory, the pedal turns a little sluggish, but this is intended. This prevents the pedal from turning independently, should you ever take your foot off the pedal during a tight cornering maneuver!
In addition to the standard aluminum pins, there are also sturdy steel pins in different colors for this pedal.

Safety note: If not otherwise specified by the crank manufacturer. Make sure that the pedal is tightened with min. 37 to max. 42 Nm.

Details:

• Pedal size: 100 x 100 mm
• Pedal height: 15 mm
• Pedal thread: 9/16
• Bearing: 1x IGUS lubrication-free plain bearings from Germany / 2x multi-sealed industrial bearings
• Pin setup: 20 aluminum pins per pedal (US Size 6/32")
• Pin height: 5 mm above the pedal
• Weight: 309 g in a pair (+/- 5% weight tolerance)
• Material: Aluminum (pedal) / CrMo (axle)