The specially designed reducing sleeve allows the use of 31.8 mm handlebars and when removed, you get a 35 mm stem. The reducing sleeve provides a wide, smooth clamping area, which is ideal for the use of carbon handlebars. The intelligent and gap-free clamping design in the lower area ensures that there are no pinch points and sharp edges and the clamping forces are distributed evenly. This ensures safety and optimum technical conditions. Because most of the loads and notch effects are always at the bottom of the handlebar. And the smooth, gap-free clamping surface extends the life of the handlebar.

Details:

• Handlebar clamping: 31.8 mm
• Length: 35 mm
• Height: 40 mm
• Ø head tube: 1 1/8 inch
• Clamp width: 50 mm
• Angle: 8
• Material: Aluminum 6061 T6
• Weight: 152 g (+/- 5% weight tolerance)